Number Plate Decals Factory

PLEASE NOTE: we do not match colours to factory brand plastics.

Nice and easy! Get your start number and name printed on your number plate and side plates!

You get your name and race number printed on your front and side plates and customized for your particular bike. Choose a background colour, we adjust the figures colour after regulations.

The decals are printed by us at 24MX with the highest quality modern printing technology. If you follow our simple installation instructions, these decals will sit firmly on the plastic and withstand a beating.

Choose a background colour and then specify the start number and the name you want on your plates.

- Nice and easy
- Graphics of highest quality that do not come off, will not crack and does not change colour.

NOTE!
The size of the figures will be adjusted to fit the number of digits you select.
All names are printed in capital letters no matter how you register the name with us, ie, "Andersson" is printed "ANDERSSON". If you choose the same trim colour as the background colour, they will be two different shades. For example, light blue and dark blue.

All the templates we use are for American standard OEM plastics

Installation:.
1.First Clean the plastic with Brake cleaner. NOTE! Also new plastic nee to be cleaned.
2.Heat the plastic with a heat gun or hair dryer (do not heat the decals).
3.Align the decal before you mount it. Attach it with masking tape, then remove some backing paper adhere to the plastics.
4. Fit the decal without touching the adhesive on the sticker.
5.Begin to attach the sticker in one corner, rubbing out air bubbles before they get too far from the edge.
6.Rub the entire sticker, especially the edges, with cloth so that the decal glue sticks to the plastic.

Custom decals are non-returnable.

"Please note! All of our decal are designed for OEM plastics. Please check your plastics are standard for your particular bike model, or you may run the risk of your templates not fitting correctly."