Pressure Washer Accessories

There’s no Place for Dirt to Hide with 24MX Pressure Washer Accessories

Pressure washers are necessary to keep your dirt bike in tip-top condition. However, 24MX pressure washer accessories take wash time to another level. Pressure washers are good for 101 jobs around the house and garden but if you run a dirt bike, they're essential. Whether you're kicking up roosters or knee-deep in mud, after a day on the dirt, crud gets baked onto your bike.

Also, it’s not only your motorcycle that gets filthy. If your motocross bike is grimy, whether you transport it on a truck or trailer, it, too, won’t escape the dirt. A pressure washer fires a high-speed water jet with enough force to loosen even the most stubborn gunge. Yet, whether the dirt is underneath your mudguard or inside your truck's wheel arch, is it possible to make the job easier? The answer, thanks to 24MX, is yes. So, let's look at the pressure washer accessories that will make wash-time a walk in the park.

High-pressure extension hose

There’s nothing more frustrating than trying to clean something that’s just out of reach. At times like these, you need an extension hose. These can handle high pressure and come pre-fitted with quick attachment fittings. You can add another 6 meters to your reach. Moreover, thanks to the small bore and thick wall of the hose, you won't experience a pressure drop. Also, 24MX extension hoses resist twisting and pinch spots.

Turtle Wax foam canons adaptors

Not so long ago, only high-end pressure washers were capable of covering your bike in thick white soapsuds. Thanks to Turtle Wax foam canon adaptors, professional-grade snow foam is available to almost everyone. A foam canon is a plastic reservoir filled with turtle wax detergent. The 24MX range of adaptors allows the end of the pressure washer wand to fit into the foam canon reservoir. As a result, high-pressure water travels through the reservoir, resulting in a stream of deep cleansing snow foam.

Water filters

Your machine will either be self-priming, capable of drawing from standing water or attaches to a tap via a hose. Whichever method, water quality is vital to your pressure washer. In some Mediterranean countries, tap water carries a high percentage of calcium. Over a short time, a calcium build-up can block nozzles and internal valves. The answer to a long and healthy life for your pressure washer is inexpensive and easy to use. It comes in the shape of a water filter. These transparent plastic devices fit between the pressure washer inlet and the water hose. Being transparent, it’s easy to see when contaminants clog the inline filter. When this happens, it’s easy to remove, clean and replace the device.

90-degree nozzle

From gun trigger to nozzle tip, a pressure washer wand is around 1 metre long. This length means you’ll be well away from the splash zone. What happens, though, when the dirt is in a hard-to-reach place, such as beneath the rear mudguard? Easy, 24MX has the pressure washer accessory to prevent you from getting covered in wet mud. Here, a 90-degree nozzle plugs into the end of your wand and lets you wash around corners. As a result, dirt has no place to hide and the operator is left nice and dry. In the fight against dirt bike grime, while pressure washers are the must-have tool, 24MX pressure washer accessories will take them to a whole new level.